D2 TURBO AND D2 TURBO LOW-VOLTAGEDOMESTIC SLIDING GATE OPERATOR Prepare for your sliding gate to be turbocharged. The D2 Turbo is a high-speed, cost-effective operator for domestic gates weighing up to 250kg, with a maximum speed of 400 millimeters per second and powerful peak push force rated at 9kgf. This operator is exceptionally quick and easy to install and set up, with all settings easily configurable via two dials on the controller. With loads of features, the D2 Turbo is the complete motor for a standard, domestic four-meter gate. The D2 Turbo Low-Voltage operator is designed specifically for sites with no mains at the gate to reduce installation costs while delivering outstanding reliability, comprehensive functionality and selectable high-security or standard speeds. With the D2 Turbo Low-Voltage, there is no need for costly high-voltage cable runs and expensive isolators. Simply use a low-voltage step-down transformer or solar power supply. Now that’s fast! Sleek, strong, stylish – and even eco-conscious – this CENTSYS has it all. MAIN FEATURES: Turbo speed for greater security and convenience. Very easy to install and set up, saving you time and money. Reliable battery backup. Dedicated Solar Mode – allows you to disable the Mains Fail buzzer when using solar power. Onboard multichannel CENTSYS receiver. Multiple Modes of Operation. Adaptive Collision Sensing. Modular components clip together for easy maintenance. Lockable, easy Manual Override. Now with robust steel pinion – can be easily retro-fitted and ensures reliable operation. D2 TURBO TECHNICAL DATA: DESCRIPTION Technical Data D2 Turbo D2 Turbo Low-voltage Input voltage 1 90V– 240V AC ±10%, 50Hz 10V - 20V AC ±10%, 50Hz; 10V - 28V DC Motor voltage 12V DC 12V DC 3 Motor power supply 4 Battery-driven (standard capacity - 12V 5Ah) Battery-driven (standard capacity - 12V 5Ah) Current consumption (mains) Intergral with controller 1A @ 13.7V +/- 1% Intergral with controller 1A @ 13.7V +/- 1% (Input voltage > 15V AC) Current consumption (motor at rated load) 8/12A 8/12A Current consumption (quiescent load) 95mA 95mA Operator push force Starting 18kgf 18kgf Rated 8kgf 8kgf Gate mass – maximum 250kg 250kg Gate length - maximum 20m 20m Gate speed - m/min 6 22 - 26m/min 22 - 26m/min Gate speed - mm/sec 367 - 433mm/sec 367 - 433mm/sec Drive Pinion 17T Module 4 17T Module 4 Maximum daily cycle 10 cycles/day 10 cycles/day Design life 30 000 cycles 30 000 cycles Operations in standby with standard battery 4, 5 Half day 60 cycles 60 cycles Full day 40 cycles 40 cycles Collision sensing Electronic Electronic Operating temperature -15°C to +50°C -15°C to +50°C Degree of protection IP54 IP54 Controller incorporated D2 Controller_H D2 Controller_L Onboard receiver type NOVA code-hopping onboard, multichannel NOVA code-hopping onboard, multichannel Receiver frequency 433.92MHz 433.92MHz Receiver code storage capacity 32 transmitter buttons 32 transmitter buttons Mass of unit packed 5kg 5kg Packaging dimensions Length: 255mm x Width: 188mm x Height: 333mm Length: 255mm x Width: 188mm x Height: 333mm [*] – Can operate off a solar supply, consult CENTSYS for assistance. [**] – A larger 7Ah battery can be used for longer standby times. [***] – Can be configured.

Read more less

D2 TURBO AND D2 TURBO LOW-VOLTAGEDOMESTIC SLIDING GATE OPERATOR Prepare for your sliding gate to be turbocharged. The D2 Turbo is a high-speed, cost-effective operator for domestic gates weighing up to 250kg, with a maximum speed of 400 millimeters per second and powerful peak push force rated at 9kgf. This operator is exceptionally quick and easy to install and set up, with all settings easily configurable via two dials on the controller. With loads of features, the D2 Turbo is the complete motor for a standard, domestic four-meter gate. The D2 Turbo Low-Voltage operator is designed specifically for sites with no mains at the gate to reduce installation costs while delivering outstanding reliability, comprehensive functionality and selectable high-security or standard speeds. With the D2 Turbo Low-Voltage, there is no need for costly high-voltage cable runs and expensive isolators. Simply use a low-voltage step-down transformer or solar power supply. Now that’s fast! Sleek, strong, stylish – and even eco-conscious – this CENTSYS has it all. MAIN FEATURES: Turbo speed for greater security and convenience. Very easy to install and set up, saving you time and money. Reliable battery backup. Dedicated Solar Mode – allows you to disable the Mains Fail buzzer when using solar power. Onboard multichannel CENTSYS receiver. Multiple Modes of Operation. Adaptive Collision Sensing. Modular components clip together for easy maintenance. Lockable, easy Manual Override. Now with robust steel pinion – can be easily retro-fitted and ensures reliable operation. D2 TURBO TECHNICAL DATA: DESCRIPTION Technical Data D2 Turbo D2 Turbo Low-voltage Input voltage 1 90V– 240V AC ±10%, 50Hz 10V - 20V AC ±10%, 50Hz; 10V - 28V DC Motor voltage 12V DC 12V DC 3 Motor power supply 4 Battery-driven (standard capacity - 12V 5Ah) Battery-driven (standard capacity - 12V 5Ah) Current consumption (mains) Intergral with controller 1A @ 13.7V +/- 1% Intergral with controller 1A @ 13.7V +/- 1% (Input voltage > 15V AC) Current consumption (motor at rated load) 8/12A 8/12A Current consumption (quiescent load) 95mA 95mA Operator push force Starting 18kgf 18kgf Rated 8kgf 8kgf Gate mass – maximum 250kg 250kg Gate length - maximum 20m 20m Gate speed - m/min 6 22 - 26m/min 22 - 26m/min Gate speed - mm/sec 367 - 433mm/sec 367 - 433mm/sec Drive Pinion 17T Module 4 17T Module 4 Maximum daily cycle 10 cycles/day 10 cycles/day Design life 30 000 cycles 30 000 cycles Operations in standby with standard battery 4, 5 Half day 60 cycles 60 cycles Full day 40 cycles 40 cycles Collision sensing Electronic Electronic Operating temperature -15°C to +50°C -15°C to +50°C Degree of protection IP54 IP54 Controller incorporated D2 Controller_H D2 Controller_L Onboard receiver type NOVA code-hopping onboard, multichannel NOVA code-hopping onboard, multichannel Receiver frequency 433.92MHz 433.92MHz Receiver code storage capacity 32 transmitter buttons 32 transmitter buttons Mass of unit packed 5kg 5kg Packaging dimensions Length: 255mm x Width: 188mm x Height: 333mm Length: 255mm x Width: 188mm x Height: 333mm [*] – Can operate off a solar supply, consult CENTSYS for assistance. [**] – A larger 7Ah battery can be used for longer standby times. [***] – Can be configured.

Read more less

D2 TURBO AND D2 TURBO LOW-VOLTAGEDOMESTIC SLIDING GATE OPERATOR Prepare for your sliding gate to be turbocharged. The D2 Turbo is a high-speed, cost-effective operator for domestic gates weighing up to 250kg, with a maximum speed of 400 millimeters per second and powerful peak push force rated at 9kgf. This operator is exceptionally quick and easy to install and set up, with all settings easily configurable via two dials on the controller. With loads of features, the D2 Turbo is the complete motor for a standard, domestic four-meter gate. The D2 Turbo Low-Voltage operator is designed specifically for sites with no mains at the gate to reduce installation costs while delivering outstanding reliability, comprehensive functionality and selectable high-security or standard speeds. With the D2 Turbo Low-Voltage, there is no need for costly high-voltage cable runs and expensive isolators. Simply use a low-voltage step-down transformer or solar power supply. Now that’s fast! Sleek, strong, stylish – and even eco-conscious – this CENTSYS has it all. MAIN FEATURES: Turbo speed for greater security and convenience. Very easy to install and set up, saving you time and money. Reliable battery backup. Dedicated Solar Mode – allows you to disable the Mains Fail buzzer when using solar power. Onboard multichannel CENTSYS receiver. Multiple Modes of Operation. Adaptive Collision Sensing. Modular components clip together for easy maintenance. Lockable, easy Manual Override. Now with robust steel pinion – can be easily retro-fitted and ensures reliable operation. D2 TURBO TECHNICAL DATA: DESCRIPTION Technical Data D2 Turbo D2 Turbo Low-voltage Input voltage 1 90V– 240V AC ±10%, 50Hz 10V - 20V AC ±10%, 50Hz; 10V - 28V DC Motor voltage 12V DC 12V DC 3 Motor power supply 4 Battery-driven (standard capacity - 12V 5Ah) Battery-driven (standard capacity - 12V 5Ah) Current consumption (mains) Intergral with controller 1A @ 13.7V +/- 1% Intergral with controller 1A @ 13.7V +/- 1% (Input voltage > 15V AC) Current consumption (motor at rated load) 8/12A 8/12A Current consumption (quiescent load) 95mA 95mA Operator push force Starting 18kgf 18kgf Rated 8kgf 8kgf Gate mass – maximum 250kg 250kg Gate length - maximum 20m 20m Gate speed - m/min 6 22 - 26m/min 22 - 26m/min Gate speed - mm/sec 367 - 433mm/sec 367 - 433mm/sec Drive Pinion 17T Module 4 17T Module 4 Maximum daily cycle 10 cycles/day 10 cycles/day Design life 30 000 cycles 30 000 cycles Operations in standby with standard battery 4, 5 Half day 60 cycles 60 cycles Full day 40 cycles 40 cycles Collision sensing Electronic Electronic Operating temperature -15°C to +50°C -15°C to +50°C Degree of protection IP54 IP54 Controller incorporated D2 Controller_H D2 Controller_L Onboard receiver type NOVA code-hopping onboard, multichannel NOVA code-hopping onboard, multichannel Receiver frequency 433.92MHz 433.92MHz Receiver code storage capacity 32 transmitter buttons 32 transmitter buttons Mass of unit packed 5kg 5kg Packaging dimensions Length: 255mm x Width: 188mm x Height: 333mm Length: 255mm x Width: 188mm x Height: 333mm [*] – Can operate off a solar supply, consult CENTSYS for assistance. [**] – A larger 7Ah battery can be used for longer standby times. [***] – Can be configured.

Read more less

D5-EVO – DOMESTIC & LIGHT-INDUSTRIAL SLIDING GATE MOTOR The evolution of the tried and tested D5 500kg gate motor for domestic and light-industrial applications. Incorporating battery backup you can bank on, potent push force and an intelligent LCD controller for easy setup, not to mention a plethora of features all tailor-made for the ultimate in security and convenience, the CENTSYS D5-Evo is the apex predator of gate motors – it simply has no competition and no equal. MAIN FEATURES: Battery backupWe pioneered power failure protection in gate motors. So in line with all our other operators, the D5-Evo sliding gate motor carries on guarding your entrance even when the lights go out. All important speedThe original D5 made a mark for itself being a quick operator opening the gate swiftly when you arrive at your entrance. The D5-Evo is now that little bit faster, opening your average four metre gate in less than 12 seconds, adding even more security and convenience. Open it the way you like itRapid opening but a more tempered closing just in case a loved one is in the way, that’s the sort of sophistication in motor control you can expect from the D5-Evo. Added to this, you can vary the acceleration and deceleration of your gate and make it move so smoothly, it will do so for many years to come. Pushes like a muleSuch a compact package but such a potent push force, it will reliably move almost any gate weighing up to 500kg for a very long time. Wide awake all the time!Incorporating the tried and tested DOSS position control system of its predecessors, the D3 and D5, the CENTSYS D5-Evo moves accurately open and closed, stopping in just the right spot each and every time. It’s also wide awake to any obstruction that might cross its path, ensuring safe and sensitive anti-crushing protection. It will turn headsThe D5-Evo takes on a new and more attractive look compared to the original D5. It’s nice to know that even your trusty gate guard will turn heads. Plug and playThe LCD-based controller makes child’s play of setting up the gate. It is literally plug and play – the D5-Evo‘s controller does all the thinking for you. It’s got it allWhat a pleasure to click through an almost endless list of really useful features – from multiple Modes of Operation, Gate operating parameters, Pillar Light control with pre-flash, Alarm functions, Positive Close Mode and Real Time Clock and Calendar to enable time-based features – to helpful diagnostic feedback. It just stops short of making the coffee! Forever yoursWe know that this compact companion will serve you well – year, after year, after year. So just like all other CENTSYS products, your beautiful D5-Evo gate motor also comes with an industry-leading 24-month warranty for added peace of mind. Alarm features (a world first)1Burglars have some nifty techniques to get into your home. Fortunately, criminals can’t outsmart the CENTSYS D5-Evo. An Ambush Alarm will alert your security company if the opening or closing beams are interrupted for a predefined, but adjustable, time. Similarly, a Break-in Alarm will go off if the closing beam outside your house is interrupted. Their gig is up!1. Requires gate safety beams to be installed Operate wirelessly, thanks to CENTSYS2Besides its code-hopping technology offering the highest level remote control security, this multichannel and multi-user CENTSYS onboard receiver allows for a multi-button remote to operate any combination of the system inputs such as Gate trigger, Pedestrian opening, Holiday Lockout, etc. It stores up to 500 transmitter buttons, and amongst other access control features, it provides the ability to selectively add and delete transmitter buttons saved into its memory.2. CENTSYS code-hopping ChronoGuard timer technology (a world first)The D5-Evo is so advanced that it no longer needs humans to look after it. With CENTURION’s ChronoGuard timer technology onboard, many of the D5-Evo‘s features can be set to operate automatically or be time-barred at any time you choose. It’s built-in Real Time Clock and Calendar allows you to set up different exclusions, which can cater for public holidays, special Time-periods, etc. D5-EVO TECHNICAL DATA: DESCRIPTION Input voltage 90 - 240V AC +/-10%, 50Hz Input voltage 12V DC Motor power supply Battery-driven – 2A charger Push force – rated 17kgf Gate speed at push force < 5kgf 22m/min Gate speed at rated push force 18m/min Duty cycle - mains present 50% Maximum daily cycle 150 cycles Gate mass – maximum 500kg Onboard receiver type CENTSYS code-hopping,multichannel, 433MHz, capacity - 500 transmitter buttons [*] – Can operate off a solar supply, consult CENTSYS for assistance. [*] – Based on a pull force of less than 50% of rated. [**] – 2 x 7Ah battery (can be upgraded for longer power failure autonomy). [***] – Based on 25°c ambient temperature and unit not in direct sunlight.

Read more less

D5-EVO – DOMESTIC & LIGHT-INDUSTRIAL SLIDING GATE MOTOR The evolution of the tried and tested D5 500kg gate motor for domestic and light-industrial applications. Incorporating battery backup you can bank on, potent push force and an intelligent LCD controller for easy setup, not to mention a plethora of features all tailor-made for the ultimate in security and convenience, the CENTSYS D5-Evo is the apex predator of gate motors – it simply has no competition and no equal. MAIN FEATURES: Battery backupWe pioneered power failure protection in gate motors. So in line with all our other operators, the D5-Evo sliding gate motor carries on guarding your entrance even when the lights go out. All important speedThe original D5 made a mark for itself being a quick operator opening the gate swiftly when you arrive at your entrance. The D5-Evo is now that little bit faster, opening your average four metre gate in less than 12 seconds, adding even more security and convenience. Open it the way you like itRapid opening but a more tempered closing just in case a loved one is in the way, that’s the sort of sophistication in motor control you can expect from the D5-Evo. Added to this, you can vary the acceleration and deceleration of your gate and make it move so smoothly, it will do so for many years to come. Pushes like a muleSuch a compact package but such a potent push force, it will reliably move almost any gate weighing up to 500kg for a very long time. Wide awake all the time!Incorporating the tried and tested DOSS position control system of its predecessors, the D3 and D5, the CENTSYS D5-Evo moves accurately open and closed, stopping in just the right spot each and every time. It’s also wide awake to any obstruction that might cross its path, ensuring safe and sensitive anti-crushing protection. It will turn headsThe D5-Evo takes on a new and more attractive look compared to the original D5. It’s nice to know that even your trusty gate guard will turn heads. Plug and playThe LCD-based controller makes child’s play of setting up the gate. It is literally plug and play – the D5-Evo‘s controller does all the thinking for you. It’s got it allWhat a pleasure to click through an almost endless list of really useful features – from multiple Modes of Operation, Gate operating parameters, Pillar Light control with pre-flash, Alarm functions, Positive Close Mode and Real Time Clock and Calendar to enable time-based features – to helpful diagnostic feedback. It just stops short of making the coffee! Forever yoursWe know that this compact companion will serve you well – year, after year, after year. So just like all other CENTSYS products, your beautiful D5-Evo gate motor also comes with an industry-leading 24-month warranty for added peace of mind. Alarm features (a world first)1Burglars have some nifty techniques to get into your home. Fortunately, criminals can’t outsmart the CENTSYS D5-Evo. An Ambush Alarm will alert your security company if the opening or closing beams are interrupted for a predefined, but adjustable, time. Similarly, a Break-in Alarm will go off if the closing beam outside your house is interrupted. Their gig is up!1. Requires gate safety beams to be installed Operate wirelessly, thanks to CENTSYS2Besides its code-hopping technology offering the highest level remote control security, this multichannel and multi-user CENTSYS onboard receiver allows for a multi-button remote to operate any combination of the system inputs such as Gate trigger, Pedestrian opening, Holiday Lockout, etc. It stores up to 500 transmitter buttons, and amongst other access control features, it provides the ability to selectively add and delete transmitter buttons saved into its memory.2. CENTSYS code-hopping ChronoGuard timer technology (a world first)The D5-Evo is so advanced that it no longer needs humans to look after it. With CENTURION’s ChronoGuard timer technology onboard, many of the D5-Evo‘s features can be set to operate automatically or be time-barred at any time you choose. It’s built-in Real Time Clock and Calendar allows you to set up different exclusions, which can cater for public holidays, special Time-periods, etc. D5-EVO TECHNICAL DATA: DESCRIPTION Input voltage 90 - 240V AC +/-10%, 50Hz Input voltage 12V DC Motor power supply Battery-driven – 2A charger Push force – rated 17kgf Gate speed at push force < 5kgf 22m/min Gate speed at rated push force 18m/min Duty cycle - mains present 50% Maximum daily cycle 150 cycles Gate mass – maximum 500kg Onboard receiver type CENTSYS code-hopping,multichannel, 433MHz, capacity - 500 transmitter buttons [*] – Can operate off a solar supply, consult CENTSYS for assistance. [*] – Based on a pull force of less than 50% of rated. [**] – 2 x 7Ah battery (can be upgraded for longer power failure autonomy). [***] – Based on 25°c ambient temperature and unit not in direct sunlight.

Read more less

D5-EVO – DOMESTIC & LIGHT-INDUSTRIAL SLIDING GATE MOTOR The evolution of the tried and tested D5 500kg gate motor for domestic and light-industrial applications. Incorporating battery backup you can bank on, potent push force and an intelligent LCD controller for easy setup, not to mention a plethora of features all tailor-made for the ultimate in security and convenience, the CENTSYS D5-Evo is the apex predator of gate motors – it simply has no competition and no equal. MAIN FEATURES: Battery backupWe pioneered power failure protection in gate motors. So in line with all our other operators, the D5-Evo sliding gate motor carries on guarding your entrance even when the lights go out. All important speedThe original D5 made a mark for itself being a quick operator opening the gate swiftly when you arrive at your entrance. The D5-Evo is now that little bit faster, opening your average four metre gate in less than 12 seconds, adding even more security and convenience. Open it the way you like itRapid opening but a more tempered closing just in case a loved one is in the way, that’s the sort of sophistication in motor control you can expect from the D5-Evo. Added to this, you can vary the acceleration and deceleration of your gate and make it move so smoothly, it will do so for many years to come. Pushes like a muleSuch a compact package but such a potent push force, it will reliably move almost any gate weighing up to 500kg for a very long time. Wide awake all the time!Incorporating the tried and tested DOSS position control system of its predecessors, the D3 and D5, the CENTSYS D5-Evo moves accurately open and closed, stopping in just the right spot each and every time. It’s also wide awake to any obstruction that might cross its path, ensuring safe and sensitive anti-crushing protection. It will turn headsThe D5-Evo takes on a new and more attractive look compared to the original D5. It’s nice to know that even your trusty gate guard will turn heads. Plug and playThe LCD-based controller makes child’s play of setting up the gate. It is literally plug and play – the D5-Evo‘s controller does all the thinking for you. It’s got it allWhat a pleasure to click through an almost endless list of really useful features – from multiple Modes of Operation, Gate operating parameters, Pillar Light control with pre-flash, Alarm functions, Positive Close Mode and Real Time Clock and Calendar to enable time-based features – to helpful diagnostic feedback. It just stops short of making the coffee! Forever yoursWe know that this compact companion will serve you well – year, after year, after year. So just like all other CENTSYS products, your beautiful D5-Evo gate motor also comes with an industry-leading 24-month warranty for added peace of mind. Alarm features (a world first)1Burglars have some nifty techniques to get into your home. Fortunately, criminals can’t outsmart the CENTSYS D5-Evo. An Ambush Alarm will alert your security company if the opening or closing beams are interrupted for a predefined, but adjustable, time. Similarly, a Break-in Alarm will go off if the closing beam outside your house is interrupted. Their gig is up!1. Requires gate safety beams to be installed Operate wirelessly, thanks to CENTSYS2Besides its code-hopping technology offering the highest level remote control security, this multichannel and multi-user CENTSYS onboard receiver allows for a multi-button remote to operate any combination of the system inputs such as Gate trigger, Pedestrian opening, Holiday Lockout, etc. It stores up to 500 transmitter buttons, and amongst other access control features, it provides the ability to selectively add and delete transmitter buttons saved into its memory.2. CENTSYS code-hopping ChronoGuard timer technology (a world first)The D5-Evo is so advanced that it no longer needs humans to look after it. With CENTURION’s ChronoGuard timer technology onboard, many of the D5-Evo‘s features can be set to operate automatically or be time-barred at any time you choose. It’s built-in Real Time Clock and Calendar allows you to set up different exclusions, which can cater for public holidays, special Time-periods, etc. D5-EVO TECHNICAL DATA: DESCRIPTION Input voltage 90 - 240V AC +/-10%, 50Hz Input voltage 12V DC Motor power supply Battery-driven – 2A charger Push force – rated 17kgf Gate speed at push force < 5kgf 22m/min Gate speed at rated push force 18m/min Duty cycle - mains present 50% Maximum daily cycle 150 cycles Gate mass – maximum 500kg Onboard receiver type CENTSYS code-hopping,multichannel, 433MHz, capacity - 500 transmitter buttons [*] – Can operate off a solar supply, consult CENTSYS for assistance. [*] – Based on a pull force of less than 50% of rated. [**] – 2 x 7Ah battery (can be upgraded for longer power failure autonomy). [***] – Based on 25°c ambient temperature and unit not in direct sunlight.

Read more less

SMART. The intelligent choice Our brand essence is “making your life easier” and, with the D5 SMART, we believe that we have created a product that is the very embodiment of this. Taking what we’ve learned through more than 30 years of being the market leader in access automation, we are bringing you a solution that gives you everything from intelligent reporting to easy mobile-based setup and operation. With unsurpassed convenience and control at your fingertips, you’ll love using the D5 SMART. Main features  Speed  The perfect balance between security, safety and convenience with a top speed of up to 35 metres per minute (583mm per second) Diagnostics and logging  Makes your life easier with advanced diagnostic feedback Intelligent logging and reporting Wireless user interface  Wireless and effortless – easy setup and configuration from your smartphone SMART hardware  Provides the best experience for installers and end-users alike with easy access to mounting hardware and optimised cable management for the neatest installation around All the most innovative technological features  Onboard multichannel NOVA receiver with 1500 button memory Wireless and effortless – easy setup and configuration from your smartphone 24V system capable of performing more operations and offering extended battery backup and power failure autonomy New and improved theft-resistant cage with a patented design offering outstanding security and peace of mind Vibration sensor that can be connected to a third-party device to notify you in the event that the gate motor is being tampered with Intelligent battery charger with onboard diagnostics and SMART communication between the charger and the controller Improved position control system incorporating hall effect technology – highly resistant to interference Individually-configurable inputs and outputs Convenient and intuitive single-action manual release D5-SMART Sliding Gate Motor Brochure (1MB) D5-SMART Installation Guide (5MB)   Technical Data D5-SMART Input voltage 1 90V - 240V AC +/-10% @ 50Hz Current consumption (Mains) 200mA Battery charger current output 1.3A Maximum number of operations per day 150 Duty cycle - Mains present 2, 3 50% Motor voltage 24V DC Motor power supply 5 Battery-driven (Standard Capacity - 2x12V) Current consumption (motor at rated load) 13A Input / Output sink currents (Max accessory current draw) I/O 1-4 100mA (12/24V) I/O 5 and 6 3A (12/24V) 10sec Pulse Motor push force - starting 30kgf Motor push force - rated 17kgf Gate mass - maximum 500kg Gate length - maximum 100m Gate speed (varies with load)4 35m/min (583mm per second) @ 17kgf Manual Override Lockable with key release Operations in standby with 2 x 7Ah (28W) battery Half day 5, 6 125 Full day5, 6 120 Collision Sensing Electronic Operating temperature range -15°C to +50°C On-board receiver type Code-hopping multichannel receiver with selective add and delete Receiver code storage capacity7 1500 Remotes Receiver frequency 433.92MHz Degree of protection IP55 Mass of unit packed (with standard kit, but excl. rack and battery) 9.1kg Packaging dimensions (with standard kit, but excl. rack and battery) 325mm wide x 244mm deep x 445mm high 1. Can operate off a solar supply, consult your local dealer for assistance2. Based on 25°C ambient temperature and unit not in direct sunlight3. Based on a motor push force of less than 50% of rated (Starting and Running forces)4. Gate opening and closing speeds can be configured to run slower dependingon the requirements of individual installations5. Can increase battery capacity for longer standby times6. Based on 4m gate, excluding all accessories7. Multiple buttons per remote can be used

Read more less

SMART. The intelligent choice Our brand essence is “making your life easier” and, with the D5 SMART, we believe that we have created a product that is the very embodiment of this. Taking what we’ve learned through more than 30 years of being the market leader in access automation, we are bringing you a solution that gives you everything from intelligent reporting to easy mobile-based setup and operation. With unsurpassed convenience and control at your fingertips, you’ll love using the D5 SMART. Main features  Speed  The perfect balance between security, safety and convenience with a top speed of up to 35 metres per minute (583mm per second) Diagnostics and logging  Makes your life easier with advanced diagnostic feedback Intelligent logging and reporting Wireless user interface  Wireless and effortless – easy setup and configuration from your smartphone SMART hardware  Provides the best experience for installers and end-users alike with easy access to mounting hardware and optimised cable management for the neatest installation around All the most innovative technological features  Onboard multichannel NOVA receiver with 1500 button memory Wireless and effortless – easy setup and configuration from your smartphone 24V system capable of performing more operations and offering extended battery backup and power failure autonomy New and improved theft-resistant cage with a patented design offering outstanding security and peace of mind Vibration sensor that can be connected to a third-party device to notify you in the event that the gate motor is being tampered with Intelligent battery charger with onboard diagnostics and SMART communication between the charger and the controller Improved position control system incorporating hall effect technology – highly resistant to interference Individually-configurable inputs and outputs Convenient and intuitive single-action manual release D5-SMART Sliding Gate Motor Brochure (1MB) D5-SMART Installation Guide (5MB)   Technical Data D5-SMART Input voltage 1 90V - 240V AC +/-10% @ 50Hz Current consumption (Mains) 200mA Battery charger current output 1.3A Maximum number of operations per day 150 Duty cycle - Mains present 2, 3 50% Motor voltage 24V DC Motor power supply 5 Battery-driven (Standard Capacity - 2x12V) Current consumption (motor at rated load) 13A Input / Output sink currents (Max accessory current draw) I/O 1-4 100mA (12/24V) I/O 5 and 6 3A (12/24V) 10sec Pulse Motor push force - starting 30kgf Motor push force - rated 17kgf Gate mass - maximum 500kg Gate length - maximum 100m Gate speed (varies with load)4 35m/min (583mm per second) @ 17kgf Manual Override Lockable with key release Operations in standby with 2 x 7Ah (28W) battery Half day 5, 6 125 Full day5, 6 120 Collision Sensing Electronic Operating temperature range -15°C to +50°C On-board receiver type Code-hopping multichannel receiver with selective add and delete Receiver code storage capacity7 1500 Remotes Receiver frequency 433.92MHz Degree of protection IP55 Mass of unit packed (with standard kit, but excl. rack and battery) 9.1kg Packaging dimensions (with standard kit, but excl. rack and battery) 325mm wide x 244mm deep x 445mm high 1. Can operate off a solar supply, consult your local dealer for assistance2. Based on 25°C ambient temperature and unit not in direct sunlight3. Based on a motor push force of less than 50% of rated (Starting and Running forces)4. Gate opening and closing speeds can be configured to run slower dependingon the requirements of individual installations5. Can increase battery capacity for longer standby times6. Based on 4m gate, excluding all accessories7. Multiple buttons per remote can be used

Read more less

SMART. The intelligent choice Our brand essence is “making your life easier” and, with the D5 SMART, we believe that we have created a product that is the very embodiment of this. Taking what we’ve learned through more than 30 years of being the market leader in access automation, we are bringing you a solution that gives you everything from intelligent reporting to easy mobile-based setup and operation. With unsurpassed convenience and control at your fingertips, you’ll love using the D5 SMART. Main features  Speed  The perfect balance between security, safety and convenience with a top speed of up to 35 metres per minute (583mm per second) Diagnostics and logging  Makes your life easier with advanced diagnostic feedback Intelligent logging and reporting Wireless user interface  Wireless and effortless – easy setup and configuration from your smartphone SMART hardware  Provides the best experience for installers and end-users alike with easy access to mounting hardware and optimised cable management for the neatest installation around All the most innovative technological features  Onboard multichannel NOVA receiver with 1500 button memory Wireless and effortless – easy setup and configuration from your smartphone 24V system capable of performing more operations and offering extended battery backup and power failure autonomy New and improved theft-resistant cage with a patented design offering outstanding security and peace of mind Vibration sensor that can be connected to a third-party device to notify you in the event that the gate motor is being tampered with Intelligent battery charger with onboard diagnostics and SMART communication between the charger and the controller Improved position control system incorporating hall effect technology – highly resistant to interference Individually-configurable inputs and outputs Convenient and intuitive single-action manual release D5-SMART Sliding Gate Motor Brochure (1MB) D5-SMART Installation Guide (5MB)   Technical Data D5-SMART Input voltage 1 90V - 240V AC +/-10% @ 50Hz Current consumption (Mains) 200mA Battery charger current output 1.3A Maximum number of operations per day 150 Duty cycle - Mains present 2, 3 50% Motor voltage 24V DC Motor power supply 5 Battery-driven (Standard Capacity - 2x12V) Current consumption (motor at rated load) 13A Input / Output sink currents (Max accessory current draw) I/O 1-4 100mA (12/24V) I/O 5 and 6 3A (12/24V) 10sec Pulse Motor push force - starting 30kgf Motor push force - rated 17kgf Gate mass - maximum 500kg Gate length - maximum 100m Gate speed (varies with load)4 35m/min (583mm per second) @ 17kgf Manual Override Lockable with key release Operations in standby with 2 x 7Ah (28W) battery Half day 5, 6 125 Full day5, 6 120 Collision Sensing Electronic Operating temperature range -15°C to +50°C On-board receiver type Code-hopping multichannel receiver with selective add and delete Receiver code storage capacity7 1500 Remotes Receiver frequency 433.92MHz Degree of protection IP55 Mass of unit packed (with standard kit, but excl. rack and battery) 9.1kg Packaging dimensions (with standard kit, but excl. rack and battery) 325mm wide x 244mm deep x 445mm high 1. Can operate off a solar supply, consult your local dealer for assistance2. Based on 25°C ambient temperature and unit not in direct sunlight3. Based on a motor push force of less than 50% of rated (Starting and Running forces)4. Gate opening and closing speeds can be configured to run slower dependingon the requirements of individual installations5. Can increase battery capacity for longer standby times6. Based on 4m gate, excluding all accessories7. Multiple buttons per remote can be used

Read more less

V400 & V500 – SWING GATE MOTOR Sleek, stylish, secure and strong: these are some of the words that describe the V-Series linear swing gate motor for domestic and industrial gates. V-Series gate automation comes standard with battery backup offers a quick and easy (not to mention good looking) installation. It is an exceptionally strong set of operators for gates up to 4m wide, per leaf (consult specifications for further details). Boasting tough-as-nails die-cast aluminium construction throughout, a grade 304 stainless steel wormshaft for the ultimate in reliability and durability and with sophisticated electronics for smooth, safe operation, V400 and V500 gives you everything you need to swing the future your way. MAIN FEATURES: Exceptionally easy system setup via LCD user interface. Supports inward- and outward-opening gates without needing mechanical endstops. High push force. Full position control. Fast operating speed, with smooth acceleration and deceleration. Safe anti-crushing protection. Multiple operating features including Intruder-detection Alarm Modes (a world first). Onboard CENTSYS code-hopping multichannel receiver with selective add and delete. Battery backup for uninterrupted operation during power failures. MODELS: V400 – Reliable operator with a shorter stroke for the majority of domestic swing gate applications. V500 – Extended stroke for larger domestic and light-industrial swing gate applications.

Read more less